I'd recommend competing step 4 while these are drying. Quickly spray off the caps and allow them to dry for at least a couple of hours before you do step 5. The great thing about this paint is that it adheres to plastic with no prep or priming, so it was super easy! I used Rust-Oleum 2x Ultra Cover (in granite and oasis blue) to paint everything for this project. I decided to paint the wheel caps to match the car, so next, I went around and taped these off/painted them before I did the rest of the car. If you're putting new decals on, it's not a huge deal if you don't get every little bit off…you just want to make sure that new decal sits flat on the plastic. I used Goo Gone and a heavy-duty scour pad (that wasn't damaging to the plastic) to get most of it off. You'll also need to remove the leftover stickers before painting. That's ok – just make sure the actual dirt and grime is off so it doesn't mess with painting. Little helpers can also get in on this step! One note: you're not going to get all of the stains out if this is an older car. If you have a pressure washer, this is the time to use it! If not, you can turn the jet function on your hose on. Make sure to set the five screws aside for reassembly! Step 2: Clean. Also take off the cap to the gas tank and unscrew the lock on the door. I did that to one of them…it's easy to do. I also popped off the rear and front headlight pieces (very carefully) with a flat-head screwdriver…make sure you don't tear the post that holds those in or you'll have to glue them back on when reassembling. Next, carefully take the four posts that hold up the roof out of the main body of the car…I say carefully because you are going to be totally grossed out by what you find inside the bottom of the posts. Once those are out, the roof should pop off pretty easily. If there anything like ours, they're going to be a little rusty and difficult to get out…a ratcheting screwdriver helps a lot with this step! They are located on the left and right sides of the cup holders in the back and right below the roof in the back. (Just for clarification, I'm using a 30th anniversary style Cozy Coupe for this post.) There are four screws in the back of the car that need to be removed. This step is actually much easier than you would think! There are only a few screws that hold the whole thing together. But this ended up being a fun DIY project with the kids that only cost us $10-15 and gave new life to something that was probably destined for the trash pile. Now, let me get this out there – would it be much easier to go out and buy a new one? Definitely. It was our spring break, so I had two little helpers to assist…you'll see how they helped throughout the post! I've heard of doing makeovers on these cars before, so I thought I'd give it a try last week. It's seen better days though – it was incredibly faded and kind of gross from being outside in the elements for years. It's was Emmie's car when she was a toddler, and since she has grown out of it, Jackson has been using it (and absolutely loving it). Read more about my affiliate link usage here.įor the longest time, I've been meaning to give our Little Tikes Cozy Coupe new life. See how you can DIY a Little Tikes Cozy Coupe makeover (for boys or girls) with simple cleaning and spray paint!Īffiliate links used in this post.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |